Equipment Category: Paper Machines

102″ Trim Beloit Fourdrinier Paper machine for lightweight and specialty grade papers. Headbox and Fourdrinier table with 7 vacuum foil boxes. Valmet Rotoformer for secondary layer can be utilized for numerous spectialty grades. Three (3) section straight through presses. Barton and Fales Dryer section containing (38) 36″ OD dryer cans. Vertical size press section. Six (6) roll conventional calender stack . Horizontal track reel with primary and secondary arms. Cameron Mdl 458 two drum Slitter rewinder. Machine last reported to run 500 FPM. Includes vacuum pump system, oil andlubrication systems,
line shaft drives, instrumentation, valves, piping, spare rolls, and related accessories. Located in the USA
102 Inch Wide Printing and Writing Paper Machine

OFFER FOR SECOND‐HAND EQUIPMENT: 106″ Trim (2.7M) Liner Paper Machine
2700mm Trim PM for Liner, Kraft, Fluting, Printing & Writing Grades
‐ 150 tons/day average production
‐ 600 m/min operating speed
‐ Basis weight of 40 to 200 gsm.
‐ Right Hand Machine
1. FOURDRINIER (2001):
‐ Voith Head box
‐ Breast roll
‐ Cantilever Frame
‐ Paper Rolls
‐ Suction boxes: 4 Vacuofoils: 3 Hydrofoils: 6
‐ Dandy Roll Dia 800mm
‐ SS Vats
‐ Suction Couch Dia 800mm
‐ Pickup device
‐ 1st Nip with bottom and Top Press Dia 600mm
‐ 2nd Nip with Bottom and Top Press Dia 650mm
‐ 3rd Nip with Bottom and Top Press
Pre‐Drying: (24) 1.5m dia x 2850 mm
Voith Yankee: 4.5m dia. x 3000 mm
Post Drying: (8) 1.5m dia. x 2850 mm
4. SOFT CALENDER (2005):
Wth 2 Nips, complete with Kusters Rolls, Heating Rolls
900mm dia drum with 6 Spools
‐ 1 Helico Pulper 18 m3
‐ Approach Flow
‐ Vacuum
‐ Steam and Condensate system, Hood
‐ Spare Presses and Spare Rolls for Calender
‐ Complete DC Drive, with control panels
‐ Winder Rewinder (2002), 1500 m/mn, Face Width 3m

Used 113″ (2.88M) Diameter X 141″ (3.60M) Face Yankee Drying Cyliner.
Manufacturer; Brunnschweilr, Germany.
Working Pressure is 3 Bars and Certified Tested.
Bare Yankee with Stainless Steel Hood

Used 3050mm Diameter X 2810mm Face MG (Yankee)
MG Drying Cylinder Manufacturer by Kobayashi Japan,
Face length measurement Excludes rope ring with a Working Pressure of 3.1 Bars,
Rope Ring Groove: 120, Gear: 218 Teeths (Internal), Pinion Gear: 29 teeth
Complete with rope ring, gearbox 7.3 ratio,
Bearing and Bearing Housing and Frame. Excludes Sole Plates and Motor.
120 MG Cylinder

Used 122″ (3.10M) Trim Carcano/Metso Paper Machine
Making Basis Weigth Grades of Kraft at 45-100 gr/m2
Max Capacity: 150 Tons Per Day at 550 MPM
New in 1974 with a Major Rebuild in 2003. Stopped in Early 2009
Manufacturered by Carcano/Metso
The Machine Includes:
Forming section with top former with Suction Pick Up
Steam box for Moisture Profile Regulation
Flat Press and Offset Press
Dryer section with 28 Dryers and 10 Felt Dryers
Size press, with a DC Sectional Drive
Kusters Mat-On-Line Soft Calender, Double Nip
Accuray QCS and Computerized Ulma Fault Detector
Pope Reel and winder. Left Hand Driven Machine
122 -3.1M-Trim Carcano-Headbox Fourdrinier

Used 120000t/y Duplex Coated Board Paper Mill
Year of Make – 1993, Year Shut Down – 2008
Includes Full Stock Prep Line, Pulp & Paper Making Workshop
Basis weight: 150~350g/m2 for a total capacity of 120,000 Tons Per Year
Trimmed width: 3380mm at a Working Speed: 500m/min
Main manufacturer: Tampella, & Metso Paper Finland
Drive system: ABB, Switzerland and Control System: Honeywell, United States
Calender—Küster(Andritz) & Hard Calender (1 set)
Coating Line —Jagenberg,(Voith)
Quality Control System—Measurex, US (Honeywell)
Roll Paper Cutter & Sheet Paper Cutter
Chain Conveyor & Hydrapulper
In Excellent, Like New Condition (Well Maintained)
All Critical Spares Included
Duplex Board Machine

Used 133″ (3.4M) Wide X 141″ (3.6M) DiameterYankee Dryer by Carcano. New in 1989
Operating steam pressure: 8.25 Bar / Test Pressure: 12.95 Bar
Bearing Centers: 4050 mm / Shell Thickness: 50mm – Originally; 44mm – now.
Operating temperature of the cylinder: 178,1 º C / Temperature cap: 450 º C
Includes the Yankees’ drying cylinder hood rated for a 90 Tons/Day capacity – toilet paper
Carcano Yankee Cylinder

Beautiful 4.572 mm Diameter by 3.517 mm Face Width Yankee Cylinder by Beloit Walmsley
Trim Width: 3.352,8 mm with a Maximum working pressure of 8 bar.
Remaining Shell Thickness: 39 mm
4.5M Dia. Beloit Walmsley Yankee Cylinder