Equipment Category: Misc. Equipment

Used 10 Ton KoneCranes (50′ Span)
In Excellet, Operating Condition
Mill Shutdown. Available Immediately

 

 

 


One (1) used 120″ (3.04M) Piranha Automatic Core Cutter, Model 10,

60″ up to 120″ Parent Core Lengths and expandable up to 200″.

Designed for Batch Cutting and standard sized cores from 1″ – 12″ Diameter

with a Maximum core range of 24″ Diameter.

Hydraulic core advanced, 3 HP motor, 230-460VAC Operation

80 PSI with a 1″ Wall thickness.

New in 2005 and includes full compliment of shafts, hoists and accessories.

In EXCELLENT CONDITION.

 

One (1) used 120″ (3.04M) Dual Mandrel Piranha Semi Automatic Core Cutter.

3″ & 6″ Mandrels, 120″ long. No Tooling Changeovers!

For high Speed Batch Cutting

Hydraulic actuated. 3 HP multi speed drive. Cut tolerance +/- 0.01.

Capability 2″ – 12″ diameter.

.500 Wall thickness.

Built 1995 with Some Spares.


Used 13.2M X 1.3M Deep Purgomat Cylindrical Clarifier Model# PU-132
Rated Capacity of 174 M/3, Manufactured New in 1988 with very little use
Dismantled and Warehoused in Excellent Condtion

Includes All Manuals & Drawings.

The voith Sulzer Escher Wyss Purgomat is considered the gray water clarification system of the future.

The Purgomat Clarifier serves for cleaning of back water of the stock preparation, e.g. filtrates of wires presses, extractors, washers, centrifuges and filters. Can also handle white water or a mixture of both.

The cleaned, cleard water is returned to the production process, the separated sedimantary & thickened flotating sludge collected for treatment.

Used 157″ (4.31M) X 31.5″ (800mm) Suction Couch Rolls

304 Grade Stainless Steel Construction in Like New Condition

Includes Bearings and Frames

Two Each Available

Used 19″ – 112″ Wide Sheet cutter Jagenberg Synchro Model AS-328
New in 1979 and well maintained over the years.
Shaftless undwind station, Roll width: 500-2870mm (19″ – 112″)
Min. width between knives 420 mm and No flying splice
Number of sheets over width: 5
Manual format adjustment
Knife load max. 600g/m – 800 g/m²
Cutting length 600 – 2030 mm
Max. speed 300 m/min.
Pallet change speed: 150 m/min
Max. staple height: 1850 mm
Max. staple weight: 6 t

Sheet Lengths:
600/100 – 650/115
700/145 – 750/180
800/250 – 850/300
900/300 – 1000/300
1150/300 – 1200/270
1300/250 – 1400/230
1500/215 – 1600/200
1700/190 – 1800/180
1900/175 – 2000/170

Used ANDRITZ BELT PRESS 1.o M Wide

Model SMX-S8P Low Profile Belt Filter Press

3 BDTPD (8hrs) in a Papermill Application

Includes Sludge Clarifier with 30-35% Discharge of Solids



Used Jagenberg Simplex Sheet cutter Jagenberg Model AS-21
size of sheets of paper: 600mm–2030mm (23″–78″)

Size in MM Length of Sheet of Paper Max Speed M/PM

600 mm 135 m/min
650 mm 150 m/min
700 mm 180 m/min
750 mm 230 m/min
800 mm 250 m/min
850 mm 250 m/min
900 mm 250 m/min
1000 mm 250 m/min
1050 mm 250 m/min
1100 mm 250 m/min
1200 mm 230 m/min
1300 mm 220 m/min
1400 mm 210 m/min
1500 mm 200 m/min
1600 mm 190 m/min
1700 mm 182 m/min
1800 mm 175 m/min
1900 mm 172 m/min
2000 mm 170 m/min

Shaftless unwind stations: 2
Max roll width: 1900 mm
Min roll width: 415 mm
Max unwind diameter: 1830 mm
Min unwind diameter: 500 mm
Diameter of core chunk: 300 mm
Max weight of rolls: 6000 KG

– change channel
– Vacu stop overlapping station
– automatic layboy
– PIV gearbox
– central lubrication system
– spare parts

Manual books and drawings complete available