Equipment Category: Paper Converting Misc

B-10 REWINDER

Comparable to a Beloit Model L with the Engineering of a Jagenberg Vari-Dur

1) TYPE : 2 DRUM SURFACE WINDER
2) PAPER GRADE : PRINTING & WRITING PAPER
3) BASIS WEIGHT : 60 ~ 250GSM
4) DIAMETER OF UNWINDER : MAX 2,000MM
5) DIAMETER OF REWINDER : MAX. 1,500MM
6) WEB WIDTH : MAX. 2,500MM
7) DESIGN SPEED : 1,800M/MIN
8) NUMBER OF SLITTER : 6PCS
9) MIN. SLITTING WIDTH : 260MM
10) DIAMETER OF PAPER CORE :

ID 76MM

Used Farrell Roll Grinder. Two Wheel Design,

New in 1964 with a full mechanical and upgrade in 1988.

Upgraded to handel sizes from

48” (1.21M)to 60” (1.50M) Diameter up to 292” (7.41M) Roll Widths.

The mill has all of the documents/drawings for the grinder that have accumulated in the file location since 1964 including maintenance records.

The grinder was last rebuilt in 1988. The grinder performed like a brand new one until we shut it down in January of 2009.

They have all of the drive components, drive shafts, jibs, saddles, grinding rocks, etc. in the boxes beside it.

Everything that is needed to run this grinder will come with it. If you need more information please contact us.

 

 

Used 65″ (1.65M) Jagenberg Synstar-E
Dual Rotary Knife Sheeter.
Mfg. new in 1993.
The unit is still In operation
Recently inspected by Jagenberg engineers and certified to be in very good condition.
ADDITIONAL SPECIFICATIONS:
Basis weigh range: 50-128 lbs/1000 sq ft. Caliper range: .010″ – .040″ .
(2) position Jagenberg type FE-C18 unwind stands.
Maximum width 65″, Maximum diameter: 72″, Maximum roll weight: 7000 lbs.
Sheet length range: 17.0″ – 65.0″. Sheet length accuracy: +/- 0.010″.
Squareness accuracy: 0.020″ (measured on 40: long sheet.
Maximum sheet width: 65″, Minimum slitting width: 17″,
Maximum speed: 1000 fpm (330 MPM),
Layboy capacity 72″ height (with skid) 8000 lb weight. 3Ph, 60Hz-460V,
Knife is Servo drive. 85 PSI air required with guide roll system,
skew adjustment, tension control.
Also includes decurling, dual web guide control system,
web cleaning, cutter section with direct drive,
layboy with ream marking, and auto piling with fingers for contiuous operation.
All Original manuals, electrical schematics and some spares are also available.

Used 68″ – 70″ Wide Strecker Sheeting Line – Complete (1986)
For Sheeting Liner / Medium Grades of Paper

Manufactured by Strecker in 1982 with a rebuild/upgrade in 1986

Maximum grammage 40 0 gramm/m2
Minimum grammage 3 0 gramm/m2
Working edging width 1750 mm
Maximum width 1800 mm Rola
The minimum width of 230 mm paper Rola
The minimum width of 580 mm cardboard Rola
The maximum diameter of 180 cm Rola

8 Peals Paper

The maximum sheet length of 115 cm
Minimum sheet length 45 cm
Automatic installation of sheet length

ALSO INCLUDED:
Automatic Brake Control System
Compressor CAESER Germany
Forklift 1.5 ton Capacity CESAB Italy
4.5-ton Forklift TOYOTA , Japan
Packaging + Scales FROM European Mfg.
Industrial Vacuum Cleaner
Hand Pallet Truck (Rocla)

Used ECH Will Sheeting – Packing line. The line consists of the following:

1.- CUTTING/SHEETING 2.- BALING 3.- BOXING/PACKAGING 4.- PALLETIZING 5.- PALLET WRAPPING.

SHEETER: 5 POCKETS MFG: ECH WILL YEAR: 1993 MODEL#: 7824 SPEED MAX: 350 MPM/MINIMUM VOLTAGE: 380 VOLT

TYPE: SLK 175-U-IR, WIDTH: 8 REAMS @ 8″ INCHES UNWINDS: 4 EACH HOLDER: 2 ORIGINALS+2 CUT: 2 TYPES:

PACKER MFG: PEMCO YEAR: 1993 / MODEL: 35 L SERIES: P3148 / SPEED: 60 REAMS/MINUTE/MINIMUM

(AVERAGE MILL OPERATION 40 REAMS/MIN)

VOLTAGE: 380V BOXER/PACKAGING MFG: CERMEX / YEAR: 2001 / MODEL: 32201 / SERIES: 884-00 / SPEED: 6 BOXES/MIN/MINIMUN BOXER/

PACKAGING MFG: CERMEX / YEAR: 2001 SERIES: 32202 / SPEED: 6 BOXES/MIN/MINIMUM

PALLETIZER MFG: RICART / YEAR: 20067 MODEL: RS-200/22

OPERATIONAL RANGE; 1900MM / WIDTH; 2200MM

WRAPPER MFG: LANTECH / YEAR: 2007 / MODEL: Q-300 / VOLTAGE: 220

Used Langston Shaftless Unwind

For up to 120” Wide Rolls X 72” OD

Self Loading (Floor Pick Up)